Argonite IG100 Inert Gas Fire Suppression System With Flame Detection 200-300 Bar 10-50°C
IG-100 uses Nitrogen for a clean, safe and 100% ecological extinguishing. This gas is widely used in variety of extinguishing systems due to its excellent pressurization conditions.
In this case it complies with equal smothering efficiency by reducing the oxygen concentration to extinguish the fire, while leaving a percentage of oxygen suitable for occupied areas. Because of this feature, people can be protected where there is the possibility if they are in the enclosure area at the time of the fire, ensuring their safe evacuation both in terms of the level of oxygen in the room, and the absence of chemicals in the discharge. In addition, its physical and dispersion properties help maintain visibility during the evacuation.
It is highly recommended for class A, B and C fires. The system operates by total flooding of the room, ensuring discharge in or less than 10 seconds with the safety conditions mentioned above. this makes it possible to adapt the quantity of extinguishing agent required, to the storage space available for the cylinders.
The system is optimized for the worst case conditions, all components are certified to ensure the strictest performance. These are necessary for the storage, detection, release and discharge of the agent at the right moment.
Parameters
| Executive standard of IG100 fire suppression system | GB25972-2010 Gas extinguishing system and components |
| Working temperature (℃) | 0℃～+50℃ |
| Working pressure | Storage pressure | 20.0 MPa |
| Max. working pressure (+50℃) | 23.2 MPa |
| Min. working pressure (-20℃) | 18 MPa |
| Container volume (L) | 80L | 140L | 180L |
| Filling weight (kg, @200 bar) | 18.38kg | 31.3kg | 40.32kg |
| System operating voltage | 220V AC,24V DC |
| System start mode | Electrical automatic, electrical manual, mechanical emergency start |
| Fire extinguishing concentration | Class A dangerous material surface fire | 31% |
| Normal heptane | 33.6% |
| Design concentration | Class A dangerous material surface fire | 40.3% |
| Normal heptane | 43.7% |
| The design concentration of the protective zone with people working | 37.5～43% |
Components
- Storage cylinder
- Frame
- Clamp
- Gas driving actuator
- Container valve
- Flexible hose
- Safety valve
- Liquid flow check valve
- Manifold
- Reducing devise
- Pilot tube
- Driving cylinder
- Container valve for driving cylinder
- Solenoid actuator
- Relief valve
- Gas flow check valve
- Select valve
- Pressure switch
- Nozzle
Application
As its name says, the single zone pipe network fm200 fire suppression system is suitable for a single protected zone, whose volume should be less than 3600 cubic meters as well as proportion should be less than 800 square meters. Because of its property and principles of putting off fire, the single zone pipe network fm200 fire suppression system can be used to protect some large and also significant places, such as the followings:
- Computer rooms
- Telecommunication center
- Facilities underground
- Offshore oil extraction
- Library
- Data and paper archives
- Valuable article storage
- Power generator storage room
Advantages
- Suitable for occupied areas
- Electrically non – conductive
- Chemically inert
- Colourless, odourless and flavourless
- No residue to clean up after the discharge
- Zero Ozone Depletion Potential (ODP)
- No greenhouse effect
- No global warming iMPact
- No decomposition products
- No fog and no loss of post-discharge visibility
- Non corrosive/toxic
- Stored as a gas
- Excellent post-discharge visibility
- Very low refill cost.
- Easy to obtain anywhere in the world
Packages
We always pack it with polyfoam first and then put it into a wooden case. Sometimes, in order to meet with customers or the safety requirement, we will make a pallet for the goods.
Product Tags:
|
|
Argonite IG100 Inert Gas Fire Suppression System With Flame Detection 200-300 Bar 10-50°C Images
|
